Category：Thermal conductive silicone sheet
Performance and Characteristics：
Thermal conductivity: 13.00 W/m·K
Ultra-high ceramic filling amount (non-metallic) gasket,
High thermal conductivity, high insulation, ultra-high withstand voltage
Low oil seepage rate, high reliability,
High compression and resilience,
Soft and self-adhesive
Easy to construct
Product Configuration：
Standard size: 200x400 mm.
It can be cut according to customers' requirements.
Thickness options range from 1.0 to 6.0 mm.
Adhesive backing can be applied as required.
Typical Applications：
Desktop computers, portable computers and servers
Laser equipment
Power supplies and UPS
Electronic communication equipment
Military electronic products
Motor and engine controllers
Energy conversion equipment
Signal converters
Mass storage devices
Vibration damping applications
Technical Parameters：
| General Characteristics of ND-TP1300 Series | ||
| Product Model | ND-TP1300 | Test Method |
| Color | Gray (The color can be adjusted) | Visual |
| Main Components | Silicone + Ceramic | *** |
| Thickness (mm) | 1.0-6.0 | ASTM D751 |
| Density (g/cc) | 3.5 | ASTM D297 |
| Hardness (Shore 00) | 50-70 | ASTM D2240 |
| Tensile Strength (psi) | 15 | ASTM D412 |
Service Temperature (°F/℃) | （-58 to 392 ° F）（-58 to 200 ℃） | *** |
| Electrical Properties | ||
| Breakdown Voltage (V) | >2500（Thickness≤0.5mm"） >4500（Thickness≥0.5mm"） | ASTM D149 |
| Dielectric Constant (1 MHz) | 17.8 | ASTM D150 |
Volume Resistivity (Ohm·cm) | 4.0X1013 | ASTM D257 |
| Fire Rating | 94 V0 | Equivalent UL |
| Thermal Conductivity | ||
| Thermal Conductivity Coefficient (W/m - K) | 13.0 | ASTM D5470 |
| Can be Glass Fiber Reinforced | It can be glass fiber reinforced at any thickness and is marked with the suffix "FG". | |
QQ客服1
QQ客服2
13713346890
dg_jnkj@163.com
